Mellow Walk Jessica Women's 6 inch Steel Toe Puncture-Resisting Work Boot
Mellow Walk Jessica Women's Steel Toe CSA-Approved Puncture-Resistant Work Boots are black leather boots that provide the foot protection you want. Made in Canada with a steel toe, these work boots are CAN/CSA-certified and meet ASTM standards for impact and compression. They also meet ASTM standards for puncture resistance and electrical hazard resisting. If you're wearing these boots to work, you can be confident your feet are safe whether you work at a construction site, in a factory or at a warehouse.
The thermal rubber outsole is flat with a composition that oils and slips. The outsoles are slip tested to the CSA Z195-09/ISO 13287 standard.
The boots are fully-lined with Dri-Lex® that wicks away moisture, and that helps keep your feet dry and comfortable during a long day at work.
For women's comfortable steel toe boots that also are puncture- and electrical hazard-resisting, just get these Mellow Walk boots.
-
Protective Toe
Impact testing determines the amount of protection to the toe under various foot pounds of force. Compression testing determines the amount of static pressure a steel/composite toe cap can withstand. Our boots are I75/C75
Electrical Hazard
Footwear is built with nail-free construction using steel composition toe caps to help insulate you from the ground retard conduction, but is not intended to be primary protection against electric shock. Leather footwear must be dry. Our electrical hazard boots meets and exceeds ASTM F2413-05 electrical hazard standards.
Puncture Resistant
PR footwear reduces the possibility of sharp objects (nails, glass or metal) penetrating through the outsole causing injury to the foot. Protection is provided by a steel or puncture resistant material imbedded in the insole of the footwear.
CSA Approved Soles that provide electric shock resistance
Impact testing determines the amount of protection to the toe under various foot pounds of force. Compression testing determines the amount of static pressure a steel/composite toe cap can withstand. Our boots are I75/C75
CSA Approved - Sole Puncture Protection with Grade 1 Protective Toe
Grade 1 protective toe will withstand up to 125 joules (50 lbs) dropped from 0.6 m. Sole puncture protection is designed to withstand a force of not less than 1200 Newtons (270 lbs) and resist cracking after being subjected to 1.5 million flexes. -
- Caña de acero
- Suela de poliuretano resistente a los resbalones y al aceite
- Completamente forrado con Dri-Lex® que absorbe la humedad
- Clasificación de la punta de protección que cumple con la Norma ASTM F2413
- Cumple con el estándar de riesgos eléctricos de la Norma ASTM F2413
- Estándares de resistencia a las perforaciones de la Norma ASTM F2413
- CSA Green Triangle cumple con el estándar de la CSA para punta de protección grado 1 y tiene una placa de protección entre la suela y la entresuela para ser resistente a las perforaciones
- CSA Omega Rectangle cumple con los estándares de la CSA para resistencia al impacto eléctrico
- 6 pulgadas de alto
- La suela está cosida en el tacón y la punta para una mayor durabilidad
Weight
8M .75 LBS
Heel Height
NOT APPLICABLE
Calf Circumference
NOT APPLICABLE